Rocky Roads, Custom Ford Broncos  
   
 

1970 Ford Bronco with 12 inch coil over suspension automatic

Year: 1970 Color: Miessen Blue with Almond Spice Price: $175,000
Updated: 9/22/2018 11:25:13 AM
Engine: Coyote 5.0 liter 430HP engine , Serpentine belt system , aluminum radiator , Modified Ignition , Modified Exhaust System , Modified Headers
Transmission: 4R70W 4 speed automatic , Atlas 2 Transfer case
Exterior: Custom Paint , Restored Hardtop , Custom Bumpers , Stock steel hood , New windshield and seal , New lights and lenses , Removable door hinges , Chrome mirrors
Interior: Linex , 6-point Roll Cage , Rear seat , Shoulder belts , Custom snap in-and-out carpet mats , vinyl door panels , vinyl rear side panels , vinyl tailgate panel
Brakes: Hydroboost , Modified All Disc , New Master Cylinder , New Lines
Steering: Modified Power Steering
Suspension: 2.5" Lift , Four Link front & rear , Rear sway bar , Front sway bar , King 2.5" Coil-over shocks
Features: component speakers , CD/MP3 Player w/ IPOD , 10" woofer box under rear seat w/600W amplifier
This 1970 Ford Bronco will be our next Coyote Bronco Legend model with 12" coil-over four link suspension with coil over shocks and a 435HP Coyote 5.0 liter Ford Racing engine. This Bronco is going to have either a 4 speed automatic transmission, along with a built Dana 20 transfer case with twin stick shifters.

This 100% rust-free Classic Ford Bronco has a clean CA title and a pristine condition, a '70 Classic Ford Bronco frame, which has already been sand blasted. We just received a new Marti Report for this Bronco, including new VIN plate to go inside of glove box, and new VIN sticker for inside of the drivers side door.

This Bronco could look like the cut and flared Bronco in the pictures with the larger tires and 15x10" aluminum wheels, or it could have UN-CUT fenders and look more original. It will have 15x6" stock wheels or 17" aluminum wheels, BFG tires, Legend bumpers, leather seating and pleated interior paneling, a Legend 6 point family roll cage, you can make just about any choice you want to make on this build right now while it's still in the beginning stages of the build.

So far, the frame has been sand blasted and the new 12" coil-over four link Legend suspension system has been custom fitted to the frame, brand new Currie Enterprises Dana 44 front axle and a new Currie heavy duty Ford 9" rear axle have been fitted. This Bronco is well on it's way to becoming the next Coyote Bronco Legend.

Our recently featured Legend Bronco (Legend #2) had our unique 12" four linked coil-over suspension system with front & rear sway bars that worked really well, however this one is going to have our re-designed Legend 12" coil-over suspension system with larger 1.25" ball joints & improved steering from our earlier Legend models. It's performance will surpass anything being built on a stock Early Bronco chassis. Bronco Driver magazine recently featured our 2nd Legend Bronco, you can check out the recent 9 page feature on tour 2nd 1974 Arctic Blue Legend page in our "past Restorations" section.

King Shock Technologies built us the 2.5" X 12" front & 10" rear short body Racing shocks for this Bronco. Eibach provided the 2.5" front & rear coil-over 350LB coil springs. This suspension will allow 12" of front wheel travel & 12" of rear wheel travel. We will be installing Hellwig front & rear sway bar systems to make this Bronco handle to it's full potential, upon completion it will outperform any other build shop's top of the line builds.

Our new Legend 12" Coil-over four link suspension system is arguably the softest suspension system you can install on a Vintage Bronco today. It goes over bumps and through dips in the road like nothing else you have ever felt in any Early Bronco. We still have 8 new Legend 12" coil-over suspension systems built which are waiting to be sold or installed for those who want to have the softest suspension system possible on their Bronco.

Here are some of the features this Coyote Legend Bronco will have on it upon completion:

* 430HP Ford Coyote 5.0 liter aluminum crate engine with new engine control management system with all new top-of-the-line engine parts surrounding the engine

* Custom stainless headers and new custom stainless 2 into 1 exhaust system

* 4 speed automatic 4R70W transmission with all top-of-the-line parts, built to hold up to 700 HP. (OR new 6 speed 6R80 automatic transmission for an extra $2,500.00)

* New Atlas 2 aluminum shift-on-the-fly transfer case with twin stick shifters

* Advanced Adapters transfer case cross member and skid plate

* New Tom Woods custom length drive shafts

* Currie heavy duty Ford 9" rear axle

* Soft-Locker in back with 4.11 gearing, new 31 spline axles, bearings & seals

* New Currie Dana 44 front axle with new knuckles, spindles and ball joints

* Front limited slip differential, heavy duty chromoly axles, all new bearings & seals

* New high torque starter wrapped with insulation to protect it from heat

* New 23 gallon fuel tank customized for fuel injection with a heavy duty steel skid plate

* Powder coated tilt steering column with custom steering wheel

* New stainless steel steering shaft with stainless u-joints

* New power steering pump & brackets

* New 4 turn power steering steering gear box

* New Hydro-boost brake system

* Wilwood 4 piston caliper 4 wheel disc brakes

* New stainless steel custom brake lines throughout

* King Shock Technologies 2.5" coil-over custom valved shocks with 12" wheel travel in front & 12" in back

* Eibach 2.5" dual rate coil springs in front, with dual rate coil springs in back

* Custom Sway Away front & rear sway bars

* MHT Fuel 17x9" black aluminum wheels or your choice of wheels

* 5 new BFG 305/65R17 Mud Terrain KM-2 tires (OR 285/65R17 tires if uncut)

* Rocky Roads Cowl Induction fiberglass hood with hood shocks & metal rails if cut and flared, (or a stock steel hood if un-cut)

* 2 stage paint job with match painted fender flares OR uncut fenders

* Custom Legend dash board

* All new stainless steel dash hardware with billet aluminum bezels

* Custom A/C system with 4 round in-dash A/C vents in-dash with built in heater system

* Dakota Digital in-dash climate control system or standard A/C controls

* Dakota Digital VHX OR Classic Instruments digital speedometer

* New Amp Research retractable power steps with LED lights

* New Alpine stereo system with Alpine 5 channel amp with 600 W of power

* Alpine sub-woofer plus 6 JL Audio component speakers

* Legend pleated vinyl front seats pattern-matched to a stock Early Bronco rear seat or folding rear seat with head rests

* Legend family 6 point roll cage with retractable front & rear seat belts, padding & wrapping & new Grade 8 mounting hardware

* Tuffy locking center console & locking glove box, match keyed

* New Polyurea interior bed liner (Linex) with black snap-in carpet mats front & rear

* Black chrome outer door handles & inner door handles, black chrome door mirrors

* New 12 pc window anti-rattle kit & all new internal & external door parts

* Power windows & power door locks

* New windshield glass & seal, custom rear view mirror with back up camera

* New driver & passenger door glass, wing windows & all new rubber throughout

* Grade 8 & stainless steel hardware throughout

*Brand new Rampage black vinyl soft top & custom bikini top (A restored hard top could still be added)

You can still custom order this Bronco to your exact specs or we can go over everything with you and come up with a Coyote Bronco Legend model that fits your style and your budget. Cut and flared or Un-Cut, it can still be your choice.

***IF you don't have the budget to do a Coyote Legend Bronco build, we can build you a more toned down version for less money. Call for more information on this option.

Call Shaun for more information and pricing 310-293-7801.
5/26/2018 - This Bronco could look like this
Rocky Roads Facebook
Copyright © 2018.  Web Hosting / SEO by DEENT.